Sawn Craft Cherokee 24 Assembly And Setup Manual page 20

Sawn Craft Cherokee 24 Manual
BUILDER'S TIP: to work on the underside of the plane after the upper vertical fuselage is
17
5) Attach a strip of the opposite side of Velcro™ hook and loop tape to the underside of the horizontal
fuselage component than you use on your batteries. Make it longer that the battery to allow fine
adjustment to the plane's center of gravity. Attach the opposing hook and loop tape to battery
packs to hold them in place when in use.
installed, set the plane on a pair of same‐size boxes.
10/17/16