Table of Contents
Advertisement
Congratulations on the purchase of your
new Bosch appliance.
On the following pages of these operating
instructions, you will find useful information
for safe use of this appliance.
We request that you read these instructions
carefully and observe all instructions. This
ensures that you will be able to enjoy this
appliance for a long time and the results of
your work will be an endorsement of your
decision to purchase this appliance.
Retain these operating instructions for sub-
sequent use or for the next owner.
You can find further information about our
products on our website.
Contents
Intended use ...............................................5
Safety instructions ......................................5
Overview.....................................................7
Before using for the first time......................7
The blender feet .........................................8
Operation ....................................................8
Care and daily cleaning ..............................9
stainless steel blender foot .........................9
Recipes for the mini blender foot ..............10
Overview
X Fig. A
1 Base unit MSM14... / MSM24...*
a ON button
b Mains cable
2 Base unit MSM16... / MSM26...*
a ON button
b Mains cable
3 Blender feet with blender blade*
a Standard blender foot
b Stainless steel blender foot
c Mini blender foot
4 Blender jug with scale*
a Freshness lid*
5 Universal cutter*
(separate operating instructions)
6 Whisk*
(separate operating instructions)
* Depending on the model
If an accessory is not included with the
hand blender, it can be ordered from
customer service:
Accessory
Blender jug
Universal cutter
Whisk
With the universal cutter, you can use the
appliance at full power.
Before using for the first
time
Before the new appliance can be used,
this must be fully unpacked, cleaned and
checked.
Warning!
Never operate a damaged appliance!
1. Remove the base unit and all accessory
parts from the packaging.
2. Remove the packaging material that is
present.
3. Check all parts for completeness.
X Fig. A
4. Inspect all parts for visible damage.
5. Thoroughly clean and dry all parts
before using for the first time.
X "Care and daily cleaning" see
page 9
Overview
en
Order no.
00481139
12009171
00750665
7
Advertisement
Table of Contents
