Table of Contents
Advertisement
CONTROL PANEL AND SYMBOLS USED
7.3
Display
1
2
3
4
5
6
7
The following information will appear in the display:
1. Date and time
2. Selected program
3. Current wash phase
4. Temperature in wash cabinet (sensor 1) with A0 value
5. Target temperature for current phase
6. Remaining time
7. Instructions and error messages
8. Cycle counter
9. Temperature in wash cabinet (sensor 2) with A0 value
When the machine is ready for operation, the display shows the last selected program as well as
the temperature, date, and time.
When one of the program buttons (P1 , P2 or P3 ) is pressed, the display shows the
program linked to that button and the following message appears in the bottom left: "press start"
or "open door" (see 7).
By pressing the P+ button, it is possible to scroll through all the available programs.
REV.0.01_COD.650184_A4
FIG. 1
8
9
Page 30
Hide quick links:
Advertisement
Table of Contents
