PRESONUS Quantum Series Owner's Manual page 22

5 Studio One Artist Quick Start
5.3 Creating a New Song
2. Click on the Audio I/O Setup tab.
3. From the Inputs tab, you can enable any or all of the inputs on your PreSonus
Quantum audio interface that you'd like to have available. We recommend
that you create a mono input for each of the inputs on your interface. If you
plan on recording in stereo, you should also create a few stereo inputs.
Power User Tip: If you plan on using the Talkback mic, you will need to enable it as
an input for your session and create a track for it.
4. Click on the Outputs tabs to enable any or all of the outputs on your
Quantum audio interface. In the lower right corner, you will see the
Audition select menu. This allows you to choose the output from which
you will audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the main output bus.
Power User Tip: If you would like this I/O configuration to be the same every time you
open Studio One, click the Make Default button.
StudioLive™ Software
Library Reference Manual
20