Skipping Blank Tape; Selecting Tape Type; Dolby* B Noise Reduction - Blaupunkt BOLOGNA DJ51 Operating Instructions Manual

CASSETTE MODE

Skipping Blank Tape

You can automatically skip sections of
blank tape that last longer than 10 sec-
onds. This requires the blank skip func-
tion to be activated.
Note:
The blank skip can only be set if a
cassette is being played.
Switching Blank Skip On / Off
Press the MENU button 8.
Press the or
"BLANK SKIP" appears in the dis-
play.
Press the or
switch the blank skip function on or
off.
Press the MENU button 8 or OK
; twice.

Selecting Tape Type

If you are playing a "Metal" or "CrO
tape, you should set the tape type se-
lector to "MTL ON".
To select the tape type
Press button 1 MTL >.
Either "MTL ON" or "MTL OFF" will ap-
pear briefly in the display.
42
button : until
button : to

Dolby* B Noise Reduction

You should switch on the Dolby func-
tion whenever you play tapes recorded
using the Dolby B process.
Press button 6
When the Dolby function is switched on,
shows in the display.
*Noise reduction system manufactured un-
der licence from Dolby Laboratories. The
word Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
"
2
>.