Software Installation (Optional) - Emerson 1410S Quick Start Manual

Wireless gateway

Hide thumbs Also See for 1410S:

March 2020

Software installation (optional)

5.1

Installation instructions

The 2-disk software pack contains the Security Setup Utility (only required

for secure host connections or OPC communications) and AMS Wireless

Configurator. The Security Setup Utility is located on Disk 1.

Procedure

1. Exit/close all Windows programs, including any running in the

background, such as virus scan software.

2. Insert Disk 1 into the CD/DVD drive of the PC.

3. If the setup program does not appear, go into the disk's file and run

autorun.exe.

4. Follow the prompts.

5. Insert Disk 2 into the CD/DVD drive of the PC.

6. Select Install from the menu when the AMS Wireless Configurator

setup begins.

7. Follow the prompts.

8. Allow AMS Wireless Configurator to reboot PC.

9. Do not remove the disk from the CD/DVD drive.

10. Installation will resume automatically after login.

11. Follow the prompts.

Note

If the autorun function is disabled on the PC, or installation does not

begin automatically, double click D:\SETUP.EXE (where D is the

CD/DVD drive on the PC) and select OK.

For more information about the Security Setup Utility and AMS

Wireless Configurator, see the Emerson 1410S Gateway and 781S

Smart Anetennas Reference Manual.

Quick Start Guide

Table of Contents