How To Use The Microwave - Russell Hobbs RHM2565BCGS User Manual

HOW TO USE THE MICROWAVE

Turn on the power
Insert the plug into a suitable 13amp mains socket.
Note: Make sure the voltage is the same as on the rating label located on
the back of the microwave (do not use extension cables or mains socket
adaptors.)
The microwave oven will flash and beep.
Setting the clock (24 hour)
When the microwave oven is first turned on, the oven will display "0:00", the
buzzer will ring once.
1) Press "CLOCK/TIMER" button to choose hours or minutes for alteration.
The hour figures will flash. When altering the hours the ''00'' on the left hand
side will flash.
2) Turn the "TIMER/WEIGHT/AUTO MENU" dial to adjust the hour figures,
the input time should be within 00 – 23 (this is a 24-hour clock).
3) Press "CLOCK/TIMER" button again and the minute figures will flash.
4) Turn the "TIMER/WEIGHT/AUTO MENU" dial to adjust the minute figures,
the input time should be within 00 - 59.
5) Press "CLOCK/TIMER" button to finish the clock setting procedure. The ":"
will then flash.
Note:
During the process of clock setting, if you press the "STOP/CLEAR" button, the
clock will return to the previous setting.
Using the Kitchen Countdown Timer
1) Press the "CLOCK/TIMER" button twice, "00:00" will be displayed.
2) Turn the "TIMER/WEIGHT/AUTO MENU" dial to select the desired time.
The input time is between 0:05 – 95:00.
3) Press the "START/+30 SEC/CONFIRM" button to start the timer. The time
will count down without activating the microwave power.
The oven will display "0:00"
20