Table of Contents
Advertisement
Top Side of the XPAD L10
Preparing the L10 Tablet for First Use
This section has steps for setting up the L10 platform for the first use.
Inserting a SIM Card
If your L10 tablet is enabled with Wireless Wide Area Networking (WWAN), you need an activated
SIM card in the SIM card holder to access the cellular data network. The SIM holder is located in the
battery bay of the L10 and can hold one or two Nano SIMs (4FF).
The L10 supports two SIM cards and switching between SIMs is done in Windows. Most people need
only one SIM. To add or change a SIM, follow these instructions:
1. Shut down and turn off the tablet.
2. Remove the battery if it is in the tablet.
3. Pull out the SIM holder shown above.
4. Put your SIM card into the slot with the contacts facing down ensuring the notched edge
5. Then put the frame back into its port and return the battery to its bay.
6
Preparing the L10 Tablet for First Use
Pen Holder
connectors
on the card aligns with the notched edge in the holder.
See the
L10 User Guide
for more details, including how to connect to a cellular network,
Setting Up Mobile Broadband.
Docking
Barcode scanner
button
SIM card holder
L10 QuickStart Guide
Advertisement
Table of Contents
