Powering Up The Tablet - Xplore L10 Series Quick Start Manual

Powering Up the Tablet

1. Remove the battery from the packaging. On the back of the tablet, insert the bottom of
2. The external power has two parts: the part that plugs into the power source and the
3. To connect external power to the tablet, open the port door to expose the power adapter
4. Plug the power cord into an outlet.
5. Press and release the oval Power button in the center of the right side of the tablet to turn
6. Keep the tablet on AC power until the battery is fully charged. However, you don't have to
L10 Quick Start Guide
the battery into the bay. Tilt the battery as shown and press it down until it clicks securely
into place.
Insert this end of
the battery first.
adapter with a cord that plugs into your tablet. Join the two parts by plugging the power
cord into the adapter to form one long cord.
port. Plug the AC adapter into this port on your tablet.
Power adapter port
The battery charging indicator on the front of the L10 tablet blinks
the battery is charging. It is solid
it on.
wait until the tablet is fully charged to turn it on. The L10 will charge while you use it.
Insert Photo
green when fully charged
Power button
Preparing the L10 Tablet for First Use
green to indicate that
7