Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
In power-on mode, press SLEEP on the remote
control repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™
20 ™ 10 ™ OFF
➜
"SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
➜
"SLEEP" is displayed if activated.
AMPLIFIER
Output power ....................................... 2 x 10 W RMS
......................................................................... 600 W PMPO
Signal-to-noise ratio ....................................... ≥ 62 dBA
Frequency response ......... 63 – 16000 Hz, ± 3 dB
Impedance loudspeakers ......................................... 6 Ω
DISC PLAYER
Number of programmable tracks ......................... 20
Frequency response .......................... 63 – 16000 Hz
Signal-to-noise ratio ....................................... ≥ 62 dBA
Channel separation .......................... ≥ 25 dB (1 kHz)
Total harmonic distortion .................. < 3% (1 kHz)
MPEG 1 ................................................. VCD version 2.0
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ................................... 32 – 256 kbps
sampling frequencies ... 48 kHz, 44.1 kHz, 32 kHz
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range ................................ 522 – 1611 kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity ................................................................. ≥ 28 dB
Total harmonic distortion ..................................... ≤ 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... ≥ 50 dBA
To deactivate the sleep timer
●
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
➜
"SLEEP" disappears from the display.
TAPE DECK
Frequency response
Normal tape (type I) ...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) .................................... 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 193 x 286 x 246 (mm)
ws
GENERAL INFORMATION
AC Power ................................. 110–127 / 220–240 V;
Dimensions (w x h x d) ... 267 x 298 x 254(mm)
Weight(with/without speakers) ......... 6.6 / 3.95 kg
Standby power consumption ............................ <7W
Specifications and external appearance are
subject to change without notice.
Clock/Timer
Specifications
~ 50/60 Hz Switchable
23