Table of Contents
Advertisement
Return
●
Press RETURN to return to the previous VCD
disc MENU level. PBC mode must be switched
on to carry out this function.
Digest
This feature allows you to scan through a VCD
for a quick review.
In the stop mode
1
Press DIGEST on the remote control.
➜
Each track on the disc will be displayed in
thumbnail on the TV screen at 5-second interval.
2
Press digit 0 – 9 on the remote control to
select the desired track.
3
PressÉ Å to playback in a full screen.
Note:
– Some VCDs have a single track, so track
selecting will be ignored.
During playback
1
Press DIGEST on the remote control.
➜
The current track of the selected disc will be
divided into 9 parts and displayed on the TV
screen.
2
Press digit 0 – 9 on the remote control to
select the desired position.
3
PressÉ Å to playback from the selected
position in a full screen.
●
To exit the DIGEST mode, you may also press
DIGEST on the remote, or 9 .
A-B Repeat
This feature is also applicable to audio CD
(except MP3-CD). To play a certain scene or
passage of the disc repeatedly:
1
Press REPEAT A- B on the remote control
during playback to mark the start of the chosen
scene or passage.
➜
REPEAT A appears on the TV screen.
2
Press REPEAT A- B again to mark the end of
the chosen scene or passage.
➜
REPEAT AB appears on the TV screen.
●
The selected scene or passage is played
repeatedly.
3
Press REPEAT A- B once more to return to
normal playback.
➜
REPEAT AB CANCEL appears on the TV
screen.
●
You may press 9 to exit the REPEAT A- B mode.
GOTO
1
Press GOTO on the remoto control.
➜
"GOTO--: --" appears on the TV screen.
2
Press digit 0– 9 on the remoto control to key
in the disc time from which you want the disc to
begin.
Notes:
– For the VCD with PBC feature (2.0 version),
switch off PBC before selecting GOTO.
– GOTO function is also applicable to audio CD.
Resume
●
In the stop mode, press RESUME on the
remote control to start playback again from
where you have stopped.
Notes:
– The resume information is lost if the disc tray is
opened, the source is changed or the system is
disconnected from the power supply.
– For VCD, it may take more than 20 seconds to
resume playback due to the large number or size
of tracks.
ZOOM
1
Press ZOOM repeatedly to select zoom
number (2 or 4) to enlarge TV screen picture.
➜
The selected zoom number will be displayed
briefly on the TV screen.
●
To return to the normal picture, press ZOOM
repeatedly until "RESTORE" is displayed.
Slow
1
Press SLOW on the remote control to watch a
VCD at a slower speed. There are 4 types of
slow modes to select.
➜
The sound is muted.
➜
On TV screen, "SLOW 1/2", "SLOW 1/4",
"SLOW 1/8", "SLOW 1/16" or "PLAY" is
displayed.
2
To resume playback at normal speed, pressÉ Å .
VIDEO CD
17
Advertisement
Table of Contents
