Tuning to radio stations
1
Press TUNER (TUNER/BAND on the
system) once or more to select your waveband
(FM or AM).
2
Press and hold SEARCH 1 or ¡
(S T on the remote) until the frequency
on the display starts running.
➜
The radio automatically tunes to a station of
sufficient reception.
➜
For FM, STEREO is displayed when
receiving stereo broadcast.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, briefly press
SEARCH 1 or ¡ on the front panel of
the system and repeatedly until you have found
optimal reception.
Radio Reception
Programming radio stations
You can store up to 30 radio stations (FM: 20;
AM: 10) in the memory.
1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROGRAM to activate programming.
➜
PROG flashes on the display.
3
Press PRESETí/ë(S T on the
remote) to allocate a number (FM: 1 to 20; AM:
1 to 10) for this station.
4
Press PROGRAM again to confirm the setting.
➜
PROG disappears. The preset number and
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Listening to preset radio stations
●
Press PRESETí/ë(S T on the
remote) until the desired preset station is
displayed.
●
In the FM band, you may press
STEREO/MONO to turn on/off stereo sound
if available.
➜
STEREO is displayed when activated.
VCD/CD
TUNER
TAPE
AUX
ECHO
KEY
PROG
ALBUM
ALBUM
19