Table of Contents
Advertisement
In shuffle playback mode:
● Press
S / T
on the system or í/ë on
the remote control to select another track in a
shuffle order.
To cancel Shuffle mode:
● Press 9.
Notes:
– When the disc cover is opened, the Shuffle
function will be cancelled automatically.
Repeat A-B (DVD/VCD/CD/MP3/WMA)
1
Press A-B at your chosen starting point.
2
Press A-B again at your chosen end point.
➜
The section A and B can be set only within
the same chapter/track.
➜
The section will now repeat continuously.
3
To exit the sequence, press A-B again.
➜
"REP CANCEL" is displayed on the TV
screen.
Programming favorite tracks
You can play the contents of the disc in the
order you want. At most 16 tracks can be
stored.
1
Load the desired discs on the disc tray.
2
While playback is stopped (by pressing 9 twice),
press PROG on the remote control to enter
program mode.
➜ "P01: 0000" is displayed.
3
Use the numeric keys (0-9) to input the track
number in the order you want.
4
Press OK to store the track.
●
Repeat steps 3-4 to store other tracks.
5
Press OK to confirm.
6
Press 38 to play the program.
To Erase program
You can erase program by doing one of the
following:
●
During program playback, press 9 twice.
●
Select other sources.
●
Open the disc door.
➜
"PROG" disappears from the display.
Disc Operations
Special DVD/VCD features
Changing subtitle language
This operation only works on DVDs with
multiple subtitle languages.
●
Press SUBTITLE to select the desired language.
Changing the picture scales
This operation only works on VCDs/DVDs/
JPEGs with images.
●
Press ZOOM repeatedly to change the
zooming scale:
ZOOM 2 p ZOOM 3 pZOOM 4
pZOOM 1/2 p ZOOM 1/3 pZOOM 1/4
pZOOM: OFF
●
To turn off zooming, press ZOOM repeatedly
until ZOOM: OFF appears.
Changing view angle
If the playing DVD disc is recorded with multiple
camera angles , the ANGLE mark on the setup
page will be set to ON automatically. This allows
you to view the picture from different angles.
●
Press ANGLE to select the desired angle:
ANGLE 1/2/3.
Note:
– This function is not available for CD or MP3
disc.
Changing sound track language
This operation only works on DVD/SVCD with
multiple audio languages.
●
Press AUDIO to select the desired language.
For VCD:
●
Press AUDIO to select the desired audio
channels for sound. This function is only available
for discs recorded with different channels:
VCD: STEREO pMONO L p MONO R p
STEREO
Note:
– If your desired language is not set in the disc,
you cannot select the language via this function.
Searching for a particular passage
1
S / T
Press and hold
à / á on the remote control) to select fast
reverse search or fast forward search respectively.
2
S / T
Press and hold
à / á on the remote control) to select the
required search speed:
on the set (or press
on the set (or press
21
Advertisement
Table of Contents
Troubleshooting
