Setting Up Progressive Scan Feature; Setting The Tv Type - Philips FWD18/98 User Manual

System Menu Operations
Setting up Progressive Scan feature (for
Progressive Scan TV only)
The progressive scan display twice the number
of frames per seconds than interlaced scanning
(ordinary normal TV system). With nearly double
the number of lines, progressive scan offers
higher picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals, a
progressive scan TV is required.
2) You have connected the DVD player to your
TV using Y Pb Pr (see "Connections: Connecting
TV- Using Component Video jacks".)
1
Turn on your TV.
2
Turn off your TV progressive scan mode or turn
on interlaced mode (refer to your TV user
manual).
3
Press STANDBY -ON B to turn on the DVD
player.
4
Select the correct Video Input channel.
➜
The DVD background screen appears on the
TV.
5
Press SYSTEM MENU.
6
Press 1 2 repeatedly to select "SYSTEM
SETUP".
7
Select "VIDEO" to "P-SCAN YPBPR", and
then press OK to confirm.
➜
The instruction menu appears on the TV.
8
Press 1 2 to highlight OK in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9
Turn on your TV progressive scan mode (refer to
your TV user manual).
➜
The instruction menu appears on the TV.
0
Press 1 2 to highlight OK in the menu and
press OK to confirm.
➜
The setup is complete now and you can star t
enjoy the high quality picture.
26
To deactivate Progressive manually
●
When the distorted sign still appears on
the TV, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
1
Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
2
Press SYSTEM MENU on the remote to exit
the system menu and then DISC to exit
progressive scan.
➜
The DVD blue background screen will appear.

Setting the TV Type

Make sure the format you need is available on
the disc. If not, your setting will be invalid.
4:3PS (Pan and Scan mode)
Select this if you have a conventional TV set and
your DVD is not formatted for wide screen
viewing. A wide picture will display on the whole
TV screen with a portion automatically cut off.
4:3LB (Letterbox mode)
Select this if you have a conventional TV set and
your DVD is formatted for wide screen viewing.
Black bars appear on the upper and lower
portions of the TV screen.
16:9 (Wide-screen TV)
Select this if you have a wide-screen TV set (you
must also set your wide screen TV to "full size").