Connections; Rear Connections - Philips FWD17/21M User Manual

Television
FM wire
antenna

Rear connections

The type plate is located at the rear of the
system.
A
Power
Before connecting the AC power cord to the
wall outlet, ensure that the following are done;
– If your system is equipped with a Voltage
Selector, set the VOLTAGE
SELECTOR to the local power
line voltage.
– All other connections have
been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
L
Cr
IN
Cb
R
Y
IN
MW loop
antenna
Speaker
(right)
B
Antenna Connection
MW Antenna
Connect the supplied MW loop antenna to the
"AM aerial" terminal. Adjust the position of the
antenna for optimal reception.
AM
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
●
Adjust the FM antenna for optimal FM stereo
reception.

Connections

Speaker
(left)
A
AC power cord
9