Connecting TV set
IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– Component Video connection
provides higher picture quality. These
options must be available on your TV set.
– Connect the system directly to the TV
set.
Using Video In jack (CVBS)
●
Use the composite video cable (yellow) to
connect the system's VIDEO OUT jack to the
video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
IMPORTANT!
– To set the VIDEO OUT (put) to 'Cr Cb
Y', (see Setting video preference).
Using component Video In jack (Cr Cb
Y)
●
Use the component video cables (red/blue/
green) to connect the system's Pr/Cr Pb/Cb Y
jacks to the corresponding Component video
input jacks on the TV set.
Connections
11