Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press y on the main set.
➜ The system will switch to the last selected
source.
● Press DISC, TUNER, AUX IN, or MP3
LINK (or DISC, TUN, AUX, or MP3 LINK
on the remote control).
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press y (or y on the remote control).
➜ The volume level (up to a maximum volume
level of 15), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 30 minutes after CD playback has
ended and no control is operated.
12
Adjusting volume
and sound
1
Adjust the VOLUME
control knob or press
VOL+/- on the remote
control to increase or
decrease volume.
➜ Display shows the
volume level
oL and a
U
number from 0-40.
2
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB if the DBB is activated.
3
Press JAZZ, ROCK, TECHNO or
OPTIMAL on the system or press DSC on
the remote control repeatedly to select the
desired sound effect: OPTIMAL, JAZZ, TECHNO
or ROCK.
➜ The selected DSC is shown.
● To cancel the DSC setting, press DSC on the
remote control repeatedly until the related DSC
disappears.
4
Press MUTE on the remote control to stop
sound playback instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To star t sound playback you can:
– press MUTE again;
– adjust the volume controls.