Discs For Playback; Different Play Modes: Shuffle And Repeat; Programming Track Numbers; Erasing The Programme - Philips FWM196/77 User Manual

CD/MP3/WMA Operation

Discs for playback

This system can playback all digital audio CD,
finalised digital audio CD-Recordable (CDR)
discs and finalised digital audio CD-Rewritable
(CDRW)discs.
MP3-CDs (CD-ROMs with MP3 tracks)
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 511 (depending on
filename length)
– Maximum album number: 52
– Supported sampling frequencies: 32 kHz, 44.1
kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
REPEAT ............ plays the current track
continuously
REPEAT ALL ... repeats the entire disc/
programme
SHUFFLE ......... plays the entire disc in random
order
SHUFFLE and REPEAT ALL
................................. repeats the disc/program
continuously in random order
1
To select your play mode, press REPEAT,
REPEAT ALL or SHUFFLE on the remote
control before or during playback until the
display shows the desired function.
Press 2; to start playback if in the STOP position.
2
➜ Playback will automatically start if you select
SHUFFLE mode.
3
To return to normal playback, press REPEAT,
REPEAT ALL or SHUFFLE on the remote
control until the various SHUFFLE/ REPEAT
modes are no longer displayed.
● You can also press 9 to cancel your play mode.
14

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1
In the STOP position, press PROGRAM on
the remote control to enter the programming
mode.
➜ P-01:-- is displayed and PROG flashes
on the display.
Use ¡1 / 2™ (í/ë on the remote) to
2
select your desired track number.
● For MP3/WMA disc, press ALBUM/PRESET
+/- and ¡1 / 2™ (í/ë on the remote) to
select the desired album and title for
programming.
➜ The selected track number and
the display panel.
3
Press PROGRAM on the remote control to
confirm the track number to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ If you attempt to store more than 20 preset
radio stations, "FULL" is displayed.
5
To start playback of your disc programme, press
2;.
Note:
– If you wish, you can add further tracks to your
current program.

Erasing the programme

You can erase the programme by:
● pressing 9 once in the STOP mode;
● pressing 9 twice during playback;
● opening the CD compartment;
● selecting another sound source
➜ CLEAR appears on the display.
flash on
PROG