Table of Contents
Advertisement
Menu Indications
PAUS.
OFF
FC: 0 %
Press the"M" button.
EFFECT LEVEL
ENTER
EXIT
Press the "+"button.
PELLET-TRIM
ENTER
EXIT
Press the "+"button.
FINAL-COMBUST
ENTER
EXIT
Press the "+"button.
LOG
ENTER
EXIT
Press the "+"button.
MENU/ADVANCED
ENTER
Burner is in standby regime.
Here you can change burner output. Level 1 = 8 (14)kW, 2
= 10 (22)kW, 3 = 12 (30)kW.
Range and Levels of Output are adjustable in advanced
menu.
Here you can set feeded pellet amount. It is not necessary, if
correct pellet weight was set in Pellet dosing in service
menu.
If you wish to clean the burner or interrupt operation from
other reasons, press the „M" button, and the burn-out
regime begins. For burner restart after ash removing, press
„M."
This internal setting can be helpful by trobleshotting, if
burner stops and starts alarm. Last 10 different error codes
are recorded. For more information about error codes, see
the „Troubleshooting".
To enter into advanced menu you need password (code) and
it is necessary to know program functions of burner.
EXIT
10
Advertisement
Table of Contents
