Navico Simrad I3005 Operator's Manual page 36

36
several units are connected via a network. By assigning several units
to the same group, a parameter update on one unit will have the
same effect on the rest of the group members.
If any of the settings require discrete control, set the group to None.
Damping
If data appears erratic or too sensitive, damping may be applied to
make the information appear more stable. With damping set to off,
the data is presented in raw form with no damping applied.
Data bridge
One device on the NMEA 2000 can act as a databridge between
Lightweight Ethernet and NMEA 2000 network.
Lightweight Ethernet to NMEA 2000
Up to five Lightweight Ethernet devices can be configured and
bridged to the NMEA 2000 network.
Each of the devices must be configured with:
• the Lightweight Ethernet SFI, selected from the list of available
devices
• Installation notes, used to identify the source in the NMEA 2000
device list
NMEA 2000 to Lightweight Ethernet
Up to five NMEA 2000 devices can be configured and bridged to the
Lightweight Ethernet network.
Software setup | I3005/I3007 Operator Manual