Troubleshooting
General
Problem
The unit does not work
properly.
No Power
No sound.
Radio stations cannot be
tuned in properly.
No speaker light
y Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
y Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
y Turn ON/OFF switch off (OFF) and on (ON).
y The battery is discharged. Recharge the battery.
y Check whether the ON/OFF switch is on (ON).
y The power cord is not plugged in. Plug in the power cord.
y Check whether electricity failed.
Check the condition by operating electronic devices using the same AC outlet.
y Check whether you select right function.
Press function button and check if you have selected the right function.
y The antenna is positioned poorly.
Adjust the angle and direction for better reception.
y The signal strength of the radio station is too weak.
Tune to the station manually.
y No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 17 for details.
y Check the light effects by pressing LIGHTING (Page 21).
Cause & Solution
Troubleshooting
23
4