Tpl-423E - TRENDnet TPL-430AP User Manual

TRENDnet User's Guide
LED Color Sequence
Green Solid
Power
N/A Off
Green Solid
2.4 GHz Green Blinking
N/A Off
Green Solid
5 GHz Green Blinking
N/A Off
Solid
Green
Blinking
Solid
DATA
Amber
(Powerline)
Blinking
Solid
Red
Blinking
N/A Off
Solid
LAN Ports
Green
(Ethernet
Blinking
Connection)
N/A Off

TPL-423E

Important Note: Please note that the TPL-423E powerline adapter will only be
included when purchasing the WiFi Everywhere™ Powerline 1200 AV2 Wireless
Kit, model TPL-430APK.
© Copyright 2016 TRENDnet. All Rights Reserved.
Definition
Device powered on
Device powered off
Wireless enabled, data transmitting/receiving
WiFi Clone is enabled
Wireless disabled
Wireless enabled, data transmitting/receiving
WiFi Clone is enabled
Wireless disabled
Powerline connected (Connection quality is Best)
Syncing or Powerline data transmitting/receiving
(Connection quality is Best)
Powerline connected (Connection quality is Better)
Powerline data transmitting/receiving (Connection
quality is Better)
Powerline connected (Connection quality is Good)
Powerline data transmitting/receiving (Connection
quality is Good)
Powerline is not synced or connected
10/20 Mbps, 100/200Mbps, Gigabit
(Half/Full Duplex) connected
10/20 Mbps, 100/200Mbps, Gigabit
(Half/Full Duplex) data transmitting/receiving
Port disconnected/no Ethernet link
Front View
Network Port
Sync Button
Button Action Function
Initiate Link/Connection and generate random
network name/key (DATA LED will go off then
Link
return to solid after connection is made).
Link /
Push
Note: The secondary or additional Powerline
Reset
adapter's Link button must also be pushed within 2
then release
(see the
minutes (120 sec) of pushing the Link button on the
section
first adapter in order to establish connectivity.
Using the
Sync Button
Reset
for Reset device to factory defaults (All LEDs will turn
instructions)
Push/Hold for 10 off and turn back on).
seconds,
Note: Will reset to the factory default private
then release network name "HomePlug AV".

Power Prong – Plugs into an available power outlet.
TPL-430AP / TPL-430APK
LED Indicators
Link/Reset Button
4