TRENDnet User's Guide
Configure your Powerline Access Point
Access your access point management page
Note: Your access point management page default IP address
the computer is connected directly to TPL-430AP's LAN port) is accessed through the use
of your Internet web browser (e.g. Internet Explorer®, Firefox®, Chrome™, Safari®,
Opera™) and will be referenced frequently in this User's Guide.
1. Plug the device into an available wall power outlet within reach of your computer's
network cable.
2. Connect a network cable from your wireless access point network port into your
computer's network port.
© Copyright 2017 TRENDnet. All Rights Reserved.
3. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to
the
4. Open your web browser and go to IP address
http://192.168.10.1
(when
5. By default, the user name is admin and password is located on the Preset Wireless
Setting Sticker. You can also find the Password on a sticker on the side of the access
point and on the device label on the back of the access point. Enter your Username and
Password, select your preferred language, and then click Login.
Note: If you have changed the password already such as in the Setup Wizard, you will
need to login using the new password.
Appendix
on page 55 on how to assign static IP address to your computer)
computer is connected directly to TPL-430AP's LAN port). Your access point will
prompt you for a user name and password.
Default User Name: admin
Default Password:
Note: User Name and Password are case sensitive.
TPL-430AP / TPL-430APK
http://192.168.10.1
or (when the
3