Add adapters to your network ..................15 Access your access point management page ..............3 Securing your Powerline Network ..........16 Setting up your TPL-430AP .................... 4 Troubleshooting ................17 Connect wireless devices to your powerline access point ..........5 Technical Specifications ..............
Connect one Powerline adapter to the router, and plug the TPL-430AP into a power outlet in another room where WiFi connectivity is needed. The WiFi Clone feature conveniently copies your existing wireless network settings to the TPL-430AP for faster network integration.
Page 4
TPL-430AP / TPL-430APK TRENDnet User’s Guide Compatibility Use your router’s WPS button and the TPL-430AP’s WiFi Clone button to conveniently copy your existing wireless network name and password for Backward compatible with Powerline 600, 500, and 200 adapters quick network integration.
Note: It is recommended to plug the adapters into nearby outlets before installing the devices to the desired locations. Note: If you are connecting the adapters to a third-party powerline device other than TRENDnet and encounter issues, please refer to the manufacturer’s documentation for the appropriate sync button procedure.
Page 9
6. For added security the TPL-430AP has been pre-configured with a unique wireless network name (SSID) and wireless key which can be found on the Preset Wireless Settings sticker or device label. Use these settings to connect your wireless laptops, mobile devices, and other wireless network devices to your network.
(when computer is connected directly to TPL-430AP’s LAN port). Your access point will the computer is connected directly to TPL-430AP’s LAN port) is accessed through the use prompt you for a user name and password. of your Internet web browser (e.g. Internet Explorer®, Firefox®, Chrome™, Safari®, Opera™) and will be referenced frequently in this User’s Guide.
5. Configure your own unique login password in the fields below. 2. Go to Setup and click on Wireless 3. TPL-430AP has pre-configured wireless settings. You can keep the default settings or change it to your own settings. Click Save to save your settings.
In addition to the hardware push button located physically on your access point, the WiFi Clone is a feature that makes it easy to setup your TPL-430AP to connect to your access point management page also has push button which is a software or virtual push network.
WPA2: This is the most secure wireless encryption available today, similar to WPA encryption but more robust. This encryption standard also supports the highest connection speeds. TRENDnet recommends setting your access point to this encryption standard. If you find that one of your wireless network devices does not support WPA2 encryption, then set your access point to either WPA or WPA-Auto encryption.
Network Advanced > Network Your TPL-430AP will automatically get its IP address when it is connected to your modem or router. This page will show you the current IP address of your unit. 1. Log into your powerline access point management page.
Note: It is highly recommended that you configure the login password. 4. Click OK to confirm your selection. 5. Your TPL-430AP will take about 3 minutes to reset and reboot back to factory default 1. Log in to TPL-430AP. settings.
TRENDnet access point model and version. To check if Click Save. If prompted, click Yes or Ok. there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link.
System > Clients System > Information You may want to check to see what devices are currently connected to your TPL-430AP. You may want to check the system information of your access point such as IP address This page will show the number of clients that are connected, their IP address and the settings, access point mode, wireless and wired network settings, access point wireless clients’...
Powerline adapters to create a Powerline network. Power LED is on or blinking and the Ethernet LED is on or blinking. Note: The TPL-430AP package only includes a single Powerline adapter. The TPL-430APK package includes TPL-423E and TPL-430AP to create your Powerline network.
Securing your Powerline Network Powerline networks consist of two or more Powerline devices connected together using the same encryption key. TRENDnet Powerline adapters automatically connect to each other over a secure encrypted signal and share the same encryption key (Default encryption key: HomePlugAV).
Q: The Wizard does not appear when I access the access point. What should I do? Q: I typed http://TPL-430AP in my Internet Browser Address Bar, but an error message Answer: says “The page cannot be displayed.” How can I access the access point management 1.
Page 33
Directiva 2004/108/CE. Eesti [Portuguese] 2004/108/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele [Estonian] TRENDnet izjavlja, da je ta TPL-406E v skladu z bistvenimi zahtevami in Slovensko teistele asjakohastele sätetele. ostalimi relevantnimi določili direktive 2004/108/ES. [Slovenian] Hereby, TRENDnet, declares that this TPL-406E is in compliance with English TRENDnet týmto vyhlasuje, že TPL-406E spĺňa základné...
Page 35
Download section limited to, duty, tax, and other fees. and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS the developers.