Scanning All Tracks On All Cds (Scan); Interrupting Play (Pause); Naming Cds - Blaupunkt Alaska DJ52 Operating Instructions Manual

CD CHANGER MODE
To play the tracks of all the inserted
CDs in random order, press the
button 5 MIX > once again.
"MIX ALL" appears briefly on the dis-
play and MIX lights up.
Stopping MIX
Press the button 5 MIX > until
"MIX OFF" appears briefly on the
display and MIX goes out.
Scanning all tracks on all CDs
(SCAN)
To listen in briefly to all the tracks
on all inserted CDs in ascending
order, hold down the OK button ;
for more than two seconds.
"SCAN" appears on the display.
Stopping SCAN
To stop scanning, press the OK
button ; briefly.
The track currently being scanned then
continues play.

Interrupting Play (PAUSE)

Press the button 1
"PAUSE" appears on the display.
Ending Pause
Press the button 1
pause.
Play then resumes.
48
>.
> during the

Naming CDs

To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 99 CDs. The
names should have a maximum of sev-
en digits.
If you attempt to allocate more than 99
names, "FULL" will appear on the dis-
play.
Entering/altering CD names
Press the MENU button 8.
Use the
"CDC NAME".
Press the or
The name of the CD appears on the
display.
Press the or
You are now in the edit mode. If the CD
you have selected is still unnamed, sev-
en underlines appear on the display.
The current input position flashes.
Use the
your characters. If a position is left
blank, you have selected the un-
derline.
Use the or
ceed to your next input position.
Press the MENU button 8 or OK
; to save the name entered.
Clearing a CD name
Listen to the CD whose name you
wish to clear.
Press the MENU button 8.
buttons : to select
button :.
button :.
buttons : to select
button : to pro-