Storage - Husqvarna CRT 36-25 Operator's Manual

Maintenance
4.15

Storage

When Follow the procedures below if the machine is to be stored for more than 30 days.
Maintaining To prepare the machine for long-term storage:
the machine
1. Drain the fuel tank and the water tank.
2. Change the engine oil.
3. Maintain the engine (see below).
4. Clean the entire trowel and engine compartment.
5. Remove dirt from the cooling fins on the engine cylinders and on the blower
housing.
6. Remove the battery from the machine and charge it periodically.
7. Cover the entire machine and place it in a dry protected area.
Maintaining If your machine has a diesel engine, consult your engine owner's manual for

the engine
maintenance instructions.
If your machine has a gasoline engine:

1. Disconnect the ignition wires from the spark plugs. Remove the spark plugs.
2. Pour approximately 30 ml (1 ounce) of SAE 30W oil into each engine cylinder
through the spark plug opening.
3. Reinstall the spark plugs, but leave the ignition wires disconnected to prevent
the engine from starting.
4. Crank the engine for one or two seconds to distribute the oil inside the engine
cylinders.
5. Reconnect the ignition wires.
44
CRT 36
wc_tx000640gb.fm