Control Arm Adjustment (Forward Or Backward) - Husqvarna CRT 36-25 Operator's Manual

CRT 36
4.5

Control Arm Adjustment (Forward or Backward)

The control arms should line up evenly. If arms appear out of adjustment, they can
be re-adjusted forward or backward as follows:
1. Loosen jam nuts (b).
2. Turn the vertical linkage (a) as follows:
Extend the linkage to adjust control levers forward. See section 4.5 before

extending linkage.
Shorten the linkage to adjust control levers backward.

3. After the arms have been adjusted to the desired position, tighten jam nuts (b).
NOTICE: Control arms are adjusted as part of the steering assist system.
Changing orientation of the control arms may affect steering effort.
wc_tx000640gb.fm
35
Maintenance