Installing Rack Mount Kit; Expansion Slot For Wireless Receiver - Phonic POWERPOD 865 User Manual

INSTALLING RACK MOUNT KIT

An optinoal rack mount kit ER-PLUS can easily be added to your Powerpod Molded Powered Mixer, allowing it to be
installed into a standard 19" rack. To do so, the handles of the Molded Mixer should first be removed, as indicated in
the pictures below.
After removing the Powerpod Molded Powered Mixers' handles, attach the rack mounting kit parallel to either side of
the mixer face using the screws provided along with the optional kit. Ensure the kit is firmly attacked before attempting
to attach the Powerpod Mixer to a rack.
After attaching the Powerpod Molded Powered Mixer to your audio rack, you may then set up all your inputs and
outputs as may be necessary. The Powerpod Molded Mixer will take up 7 standard units of rack space.

EXPANSION SLOT FOR WIRELESS RECEIVER

6
You may have noticed a small door on the side of your
Powerpod Molded Mixer, which, inside, has a small expansion
slot. This is for the addition of a wireless receiver module
(the Phonic WM0-L, not included with this mixer. The WM-
SYS1 mono wireless transmitter/receiver kit is available
at all Phonic retailers.). By simply inserting your wireless
receiver module into the expansion slot, and screwing it into
place, you can then receive a wireless signal through your
Powerpod Molded Mixer (wireless transmittion is achieved
through the Phonic WM60 wireless transmitter. The WM0-L
and WM60 are available together in the WM-SYS1 wireless
kit at your nearest Phonic dealer). The signal of the wireless
input is defaultly routed to the channel 1 input.
POWERPOD 865/885 Plus