Section 3-Shipping And Handling; Unpacking; Inspection; Storage - Invacare Platinum IRC5LXAW User Manual

Oxygen concentrators standard, with/senso2 and homefill
Hide thumbs Also See for Platinum IRC5LXAW:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
SECTION 3—SHIPPING AND
HANDLING
NOTE: For this procedure, refer to FIGURE 3.1 on page 12.
Before you install and operate the concentrator, please refer to
Platinum Series User Manual.
The Platinum concentrator should ALWAYS be kept in the
upright position to prevent cabinet damage while being
transported. The shipping container has been designed to
assure maximum protection of the concentrator.
If the concentrator is to be reshipped by common carrier, it
should be packed in a new carton. Additional cartons are
available from Invacare.
The air compressor suspension system has been engineered to
withstand severe motion and orientation.

Unpacking

1. Check for any obvious damage to the carton or its contents.
If damage is evident, notify the carrier, or Invacare.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
NOTE: Retain carton and packing materials for storage of the
Platinum.

Inspection

1. Examine exterior of the oxygen concentrator for nicks,
dents, scratches or other damages. Inspect all components.

Storage

1. Store the repackaged oxygen concentrator in a dry area.
2. DO NOT place other objects on top of the repackaged
concentrator.
Part No 1141491
SECTION 3—SHIPPING AND HANDLING
11
Platinum™

Advertisement

Table of Contents
loading

Table of Contents