Makita DVC260 Original Instructions Manual page 9

Indicating the remaining battery
capacity
Only for battery cartridges with "B" at the end of the
model number
Fig.2: 1. Indicator lamps 2. Check button
Indicator lamps
Lighted Off
NOTE:
Switch box position
aged, pass the cord through the hook as illustrated.
Fig.3: 1. Hook 2. Cord
Adjusting belts
Shoulder belts
Fig.4: 1. Strap 2. Fastener
Upper belt
Fig.5: 1. Strap 2. Fastener
Lower belt
Fig.6: 1. Strap 2. Fastener
Carrying hook
uum cleaner body.
Fig.7: 1. Carrying hook
Hose band
nozzle.
the hose band through the slot on the body. You can
attach the hose band on either side.
band through the loop on the lower belt.
Remaining
capacity
Extension wand
Blinking
75% to 100%
50% to 75%
the ring at your desired length.
25% to 50%
Switch action
0% to 25%
Charge the
want to lower the suction power, press
battery.
suction power (1). When you press the button while the
may have
vacuum cleaner is running, the suction power switches
the vacuum cleaner, press
LED light
ASSEMBLY
9 ENGLISH
Fig.8: 1. Hose band 2. Slot 3.
Fig.9: 1. Hose band 2. Free nozzle
Fig.10: 1. Ring
button.
Fig.11
Fig.12
CAUTION:
Do not look in the light or see the
source of light directly. Never aim the light to
other people's eyes.
NOTE:
minutes.
NOTE:
or other reasons.
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
button one
button to
button again.