Operation - Makita DVC260 Original Instructions Manual

Assembling hose/wand/nozzle
Connect the vacuum cleaner body with the hose,
cleaner body and turn it clockwise. Connect the nozzle
cleaner body then connect the hose with the extension
wand.
Connecting vacuum cleaner body and hose
Fig.13: 1. 2. Vacuum cleaner body
Connecting extension wand and nozzle
Fig.14: 1.
3.
NOTE:
the hose.
Connecting hose and extension wand
Fig.15: 1. Hose 2.
NOTE:
directly.
CAUTION:
properly installed. Otherwise the vacuumed dust
or particles may be exhausted from the cleaner
and they may cause respiratory disease to the
operator.
NOTICE:
results in reduced suction power.
1.
latch to open the lid.
Fig.16: 1. Hook 2. Lid
2.
the room as illustrated.
Fig.17: 1. Slit 2. Filter bag / Dust bag
When using the dust bag (optional accessory), insert
Fig.18: 1. Slit 2. Brim
3.
and push the cardboard portion to the end. Make sure
Fig.19: 1.
3.
4.
2. Free nozzle
3. Free nozzle
1.
necessary.
2.
lower the suction power, press
During cleaning, hook the switch box on the lower belt.
When you suspend the operation, the hook on the hose
3.
When using a dust bag (optional accessory), take out
latch.
2. Rim on
10 ENGLISH

OPERATION

WARNING:
Operators shall be adequately
instructed on the use of the vacuum cleaner.
WARNING:
This vacuum cleaner is not suit-
able for picking up hazardous dust.
CAUTION:
This cleaner is for dry use only.
CAUTION:
This cleaner is for indoor use only.
CAUTION:
Always insert the battery cartridge
all the way until it locks in place.
you.
Fig.20
button to stop.
Fig.21
Fig.22
Fig.23
NOTE:
restarting.
Fig.24: 1. Strip
Fig.25: 1. Latch
NOTICE:
reduced suction power.
NOTICE:
bag repeatedly, use a dust bag (optional accessory).
button one more