Functional Overview; Front Panel; Rear Panel - Philips DVP3570/F7 Instructions Manual

FUNCTIONAL OVERVIEW

Front Panel

DVD PLAYER DVP3570
* The unit can also be turned on by pressing these buttons.
1. Disc tray
• Place a disc when opening the disc tray.
2. Infrared sensor window
• Receive signals from your remote control so that
you can control the unit from a distance.
3. A (open/close) button*
• Press to open or close the disc tray.
4. C (stop) button
• Press to stop playback.

Rear Panel

1
1. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
2. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an audio cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
4. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor,
AV receiver or other device with an S-video cable.
5. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port
with an HDMI cable.
6 EN
1
2 3
5 6 7
2 3*
5. Play indicator
• Lights up when the inserted disc is being played
back.
6. B (play) button
• Press to start or resume playback.
7. Standby-On indicator
• This indicator lights up in red when the unit is in
standby mode and turns off when the power is on.
8. y y (standby-on) button
• Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
• If timer programmings have been set, press to set
the unit in timer-standby mode.
4
6. DIGITAL AUDIO OUT (COAXIAL) jack
• Use to connect an AV receiver / amplifier, Dolby
Digital decoder or other device with a digital audio
coaxial input jack with a digital audio coaxial cable.
7. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with a video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
4 5 6 7 8