Functional Overview; Front And Rear Panels - Philips DVP5960 User Manual

Functional Overview
Front and Rear Panels
USB Portl
— Input the supported USB device.
STANDBY
-ON
C)
Turns the player on or switches it to
standby mode
Disc tray
OPEN/CLOSE -
-
Opens or closes the disc tray
Display
— Shows information about the current
status of the DVD Player
Mains (AC Power Cord)
-
Connect to a standard AC outlet
HDMI
— Connect to HDMI - compatible device
(example; LCD/Projector/Plasma/
Projection TV, HDTV or receiver)
CVBS (VIDEO Out)
-
Connect to CVBS Video input of aTV
YPbPr (Component Video Out)
— Connect toYPbPr input of aTV
■ STOP
- Stops playback
'II PLAY/PAUSE _
—
Starts or pauses playback
HD UPSCALE
— Set HDMI output, switches the
resolution to'480p','S76p',
'720p'(50Hz),'720p'(60Hz) and
1080i'(50Hz),'1080i'(60Hz).
IR Sensor
— Point the remote control towards this
sensor
Audio Out (Left/Right)
— Connect to AUDIO inputs of an —
amplifier, receiver or stereo system
COAXIAL (Digital audio out)
— Connect to coaxial AUDIO input of a
digital audio equipment
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
17