Audio Setup - Philips DVP3113/58 User Manual

Press SETUP.
» [General Setup] menu is displayed.
Press .
3
Select an option, then press OK.
4
Select a setting, then press OK.
To return to the previous menu, press .
To exit the menu, press SETUP.
Set play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
[Lock] - Restrict access to the current disc.
The next time you want to play this disc or
unlock it, you need to enter the password.
[Unlock] - Play all discs.
Select an on-screen menu language.
[Sleep Timer]
Switch automatically to standby at the preset time.
[Off] - Disable sleep mode.
,
-Select the count down time for this product
to switch to standby.
[Auto standby]
Turn on or off automatically standby.
[On] - Switch to standby 15 minutes of
inactivity (for example, in pause or stop
mode).
[Off] - Disable the auto standby mode.
®
Display the DivX registration code.
Tip
Use this player's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
12 EN
, ,
®
VOD

Audio setup

Press SETUP.
» [General Setup] menu is displayed.
Press to select [Audio Setup], then press .
3
Select an option, then press OK.
4
Select a setting, then press OK.
To return to the previous menu, press .
To exit the menu, press SETUP.
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
[Stereo] - For stereo output.
[LT/RT] - For surround sound output through
two speakers.
receiver that is connected through the digital jack
(coaxial/digital).
- Select a type of digital
output.
[Off] - Disable digital output.
[All] - Support multi-channel audio
formats.
[PCM Only] - Downmix to two-channel
audio format.
[LPCM Output] - Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
- For discs recorded at sampling
rate of 48 kHz.
- For discs recorded at sampling
rate of 96 kHz.
Note
[LPCM Output] setting is only available if the
Output] is set to [PCM Only].
The higher the sampling rate, the better the sound
quality.