Table of Contents
Advertisement
[Disc Lock]
Set the play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
•
[Lock] - Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
•
[Unlock] - Play all discs.
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
Switch automatically to standby at the preset time.
•
[Off] - Disable sleep mode.
•
[15 Mins], [30 Mins], [45 Mins], [60 Mins] -
Select the countdown time for this product to
switch to standby.
[Auto Standby]
Turn on/off the auto standby mode.
•
[On] - Switch to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
•
[Off] - Disable the auto standby mode.
[DivX(R) VOD Code]
®
Display the DivX
registration code and
deregistration code.
•
[Registration] - Obtain a registration code to
register this product on website.
•
[Deregistration] - Obtain a deregistration
code to cancel the registration of this product
on website.
Note
•
Use this product's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
16
EN
1
2
3
4
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
•
•
[Digital Audio]
Select a digital setting based on the digital amplifi er/
receiver that is connected through the digital jack
(coaxial/digital).
•
•
®
VOD
•
•
[HDMI Audio]
Select the HDMI audio setting when you connect
this product and the TV with an HDMI cable.
•
•
[Audio Sync]
Set the delay time for audio output when you play
a video disc.
Press
.
» [General Setup] menu is displayed.
Press
to select [Audio Setup], and then
press
to enter the submenu.
Select an option, and then press OK.
Select a setting, and then press OK.
•
To return to the previous menu, press
.
•
To exit the menu, press
[LT/RT] - For the surround sound output
through two speakers.
[Stereo] - For the stereo output.
[Multi Channel] - For multi-channel output.
[Digital Output] - Select a type of digital output.
•
[All] - Support multi-channel audio formats.
•
[Off] - Disable digital output.
•
[PCM Only] - Downmix to two-channel
audio format.
[LPCM Output] - Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
•
[48kHZ] - For discs recorded at sampling
rate of 48 kHz.
•
[96kHZ] - For discs recorded at sampling
rate of 96 kHz.
Note
[LPCM Output] setting is only available if the
[Digital Output] is set to [PCM Only].
The higher the sampling rate, the better the sound quality.
[On] - Allow audio output through the TV and
the speaker system. If the audio format on the
disc is not supported, it will be downmixed to
two-channel sound (linear-PCM).
[Off] - Disable the audio output from HDMI
devices connected to this player.
.
Advertisement
Table of Contents
