Settings; Instructions For Settings - V-ZUG Coin System 1 Operating Instructions Manual

6

Settings

6.1

Instructions for settings

Different settings (parameters) can be set for the appliance. This is described
below for both models.
Press the «SET» button for about 3 seconds.
– appears in the display (model 245).
– appears in the displays (model 246).
Press the «+» or the «–» settings buttons to toggle between the parameters.
Press the «SET» button to select a parameter.
Use the «+» or «–» buttons to change the value.
Press the «SET» button to save the value.
– The setting is saved.
To exit, press the «SET» button for about 3 seconds.
It is possible to exit the settings without saving if:
• a settings button is not pressed for one minute,
• a coin is inserted,
• or an appliance is selected (model 246).
Example: With the setting for token operation, the parameters
(CHF and EUR) are not visible.
18
to