Inserting Coins; Emptying The Coin Box - V-ZUG Coin System 1 Operating Instructions Manual

4.3

Inserting coins

Model 245
The coins are inserted in the coin/token slot.
– The current credit is shown in the display.
Model 246
Select required appliance.
– The display with the current credit flashes for 5
seconds.
Insert the coins while the display is flashing.
– The current credit is shown in the display.
4.4

Emptying the coin box

Coins accepted by the coin validator drop into the coin box. It can hold
approximately 400 coins. If a coin is not validated, it automatically drops into
the return slot.
Use the key to remove the coin box
cover 1.
Remove the coin box 2, empty it and
then put it back.
As a check, read off the totaliser.
Put the coin box cover 1 back and
lock.
4 Your appliance
1
2
13