ELNA eXcellence 740 Replacement Manual page 9

A-Board Replacement
2. Gently slide the power supply
cable thru the cord guide and
behind the white post, as shown
in the picture. Failure to follow
these instructions can cause
power cord cable interference
with motor belt
damage the A board unit.
which can
1. Remove and discard the old cord guide
plate. Install the new plate, do not tighten the
screw yet.
3. Connect the power supply
cable to the power supply.
Double check again making
sure both wires are positioned
correctly. Tighten the cord guide
screw making sure not to pinch
the wires.
8