Advertisement
ASSEMBLY INSTRUCTIONS
IMPORTANT: ASSEMBLE ON FLAT AND SOFT SURFACE TO AVOID SCRATCHING.
1. Put Left Back Leg (27) and Left Front Leg (25) into Leg End Caps (23) as shown.
2. Assemble Left Side Cart Frame.
2.1. Loosen 6pcs pre-assembled M6X16mm Screws from "X" position and leave the screw heads
protruding approximately 5mm.
2.2. Hang Left Side Beam (26) and Drip Tray Support (14) to Left Front Leg (25) and Left Back Leg
(27), then fasten the screws on "X" position.
2.3. Take 2pcs AA Screws from the hardware pack, and fasten the screws on "Y" position.
Note: Be sure part 14 and 26 are installed correctly as per the image shown.
AA M6X16 mm Screw
Screw
14
X
AA
Y
25
26
X
X
X 2
X 2
Scr
10
ew
X
Y
27
X
X
X
Y
Hide quick links:
Advertisement
