Troubleshooting; Replacement Parts - Black & Decker BDST1600 Series Instruction Manual

WARNING:
OFF and disconnect plug from electrical outlet before performing maintenance or
troubleshooting to the vacuum cleaner.
Vacuum cleaner won't run: Possible causes
1. Vacuum cleaner is not plugged in firmly
2. Blown fuse/tripped breaker
Vacuum cleaner won't vacuum effectively:
Possible causes
1. Filter clogged, wet or dirty.
2. Dust cup clogged.
Dust blows out of air vent:
Possible causes
1. Filter not properly secured to filter frame.

Replacement Parts

1
2
3
Other maintenance or service not included in the manual should be performed by an
authorized service representative. Thank you for selecting a BLACK&DECKER product.
For any questions or concerns, please contact our Customer Service at

Troubleshooting

To reduce the risk of electric shock, turn power
Item:
1
2
3
Please do not return this product to the store
1-800-524-6716
Remedies
1. Check electrical outlet
2. Check/replace fuse or reset breaker
Remedies
1. Follow instructions for cleaning.
2. Follow instructions for emptying.
Remedies
1. Follow instructions for replacing filter above.
Part No.:
ST0101
ST0102
ST0106
10
Part Name:
Crevice Tool
Filter
Pre-Motor Filter