Advertisement
- MOVE THE 37B DOOR INTO THE CLOSED
POSITION AND MARK WHERE THE FAST006
PADBOLT TOUCHES THE CO96A RAMP.
- MOVE THE 37B DOOR OUT OF THE WAY
AND DRILL A Ø10mm HOLE THROUGH THE
CO96A RAMP AND 79H CHANNEL.
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 10mm HOLE INTO THE WALL SHEET
- DRILL A 10mm HOLE INTO THE CONCRETE
- POSITION THE STEEL ANGLE
- PLACE THE DYNABOLT INTO THE CONCRETE HOLE & TIGHTEN
- SECURE THE STEEL ANGLE TO THE WALL SHEET USING THE REMAINING NUT &
- REPEAT FOR EACH ANCHOR LOCATION
ABSCO INDUSTRIES
Bin Cover Model: 1508BCK
FINAL CONSTRUCTION
TIP: TIE A STRAP OR CORD THROUGH THE FAST062 SADDLE
ONTO YOUR WHEELIE BIN HANDLES TO CREATE A ONE-LIFT
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
LID OPENING FEATURE
BOLT & NUT
STEEL
ANGLE
DYNABOLT
SHED MODEL: 1508BCK
ANCHORING OF SHED
LOCATION OF 4
CONCRETE
ANCHORS
FAST052
LATCH
FAST052
HASP
WALL
SHEET
SLAB
BOLT
11-04-2018
PAGE 18
Advertisement
