Fujitsu Siemens AMILO Pa Series Easy Manual page 59

Headphones/SPDIF port (loudspeaker port / line out)
You can use the Headphones/SPDIF port to connect headphones, external loudspeakers or an audio
device with a digital optical input to your notebook.
If you connect headphones or external loudspeakers, the built-in loudspeakers are
i
disabled.
If you purchase a cable from a retailer, please note the following information:
The headphones / SPDIF port on your notebook is a "3.5 mm jack socket".
If you want to connect headphones or loudspeakers, you will need a "3.5 mm jack plug".
If you want to connect audio devices with a digital optical input, you will need a "3.5 mm
jack plug/SPDIF".
Connectors
Adjusting the volume
► Set the desired volume with the key combination Fn + F11 or Fn + F10 .
or
► use the Windows volume control under Start - Programs - Accessories - Multimedia - Volume
Control to adjust the volume.
10600718731, edition 1
► Connect the data cable to the external
device.
► Connect the data cable to the
headphones/SPDIF port of the notebook.
Port
Connecting external devices
Pin configuration
optical
49