Password Protection Of Operating System - Fujitsu Siemens AMILO Pa Series Easy Manual

Hide thumbs

Table Of Contents

Table of Contents

►

Select the Save Changes and Exit option in the Exit menu.

►

Select Yes and press the Enter key.

The notebook is rebooted and the new password is effective. If you now want to call up the BIOS

Setup Utility, you must first enter your supervisor or user password. Please note that you only have

access to a few BIOS settings with the user password.

Changing the supervisor or user password

In order to change the Supervisor password you need to be logged into the BIOS Setup Utility using

the existing Supervisor password.

►

Call the BIOS Setup Utility and go to the Security menu.

►

When changing the password, proceed exactly as for password assignment.

Cancelling passwords

To cancel a password (without setting a new password) run the following steps:

►

Call the BIOS Setup Utility and go to the Security menu.

►

Mark the Set User Password or Set Supervisor Password field and press the Enter key.

With Enter current Password you will then be asked to enter a password.

With Enter new Password you will then be asked to enter a new password.

►

Press the Enter key twice.

►

Select the Save Changes and Exit option in the Exit menu.

►

Select Yes and press the Enter key.

Your notebook will now restart and the password is cancelled.

With the supervisor password you simultaneously deactivate the user password.