Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
12969T-B
12970T-B
Straight Shower Column With Showerhead
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Shut off the water supplies to the fitting.
2. Inspect the supply tubing for damage. Replace as necessary.
3. Observe local plumbing codes.
4. Recommended minimum working pressures is 0.2MPa(2bar).
5. The highest working pressure for showerhead is 0.5MPa(5bar). If it exceeds 0.5MPa(5bar), a pressure reducer
is needed. The highest water and environment temperature is 60°C. Please keep handspray, showerhead and the
shower arm away from heater, or it may become damaged and cause injury to the user.
HANDLE OPERATION
Turn the diverter handle counter-clockwise, the back connector of the diverter works; turn it clockwise, showerhead
works.
ROUGH-IN DIMENSIONS
400
Ø203
68
34
G1/2˝
G1/2˝
12969T-B
1240259-2A-A
400
Ø139
68
34
G1/2˝
G1/2˝
Finished Floor
12970T-B
G1/2˝
G1/2˝
1
Advertisement
Related Manuals for Kohler 12969T-B
Summary of Contents for Kohler 12969T-B
-
Page 1: Installation Instructions
Straight Shower Column With Showerhead BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. - Page 2 1196610 880010 Tighten the showerhead onto the tube kit outlet(16) with strap wrench. 1196628 For 12969T-B, before installation, take out the washer(17) and install the 1196607** regulator(18) into the showerhead inlet if needed, then reinstall the 1111667** 870921 washer as shown.