Table of Contents
Advertisement
2. Unscrew and remove the outlet plate; then use a voltage tester to make sure that the
circuit is dead.
3. Unscrew the outlet from the electrical box and pull it out with the wires still attached.
Hot Wire
Neutral Wire
Ground
Three wires will be attached to the outlet: an incoming hot wire, which is black; a neutral
wire, which may be white, or any other color except green; and a grounding wire, which
is green or bare copper. There may be other wires in the box, but you are only dealing
with the ones connected directly to the outlet.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the YS6704-UC and is the answer not in the manual?
Questions and answers