THERAGUN G2PRO Owner's Manual page 14

HOW TO EXPERIENCE
THE G FACTOR
I started my G2PRO
Contact your body with the G2PRO
float across your body. Get used to the feeling
of vibration therapy. Apply pressure that is
comfortable for you. Let the G2PRO
work. You should not be sore as a result of use.
How fast should I move the
G2PRO ?
™
The slower the movement the better. Move
approximately 3 cm per second. Take your time
floating the G2PRO
How hard should I press the
G2PRO into my muscles?
™
The best process is to start the G2PRO
from your body, then once it is operating
contact your body with the AmpBIT and allow
the G2PRO to float across your tissue. Once
™
you have a feel for the pressure you desire you
can increase the pressure slowly until you reach
a comfortable balance.
12
. Now what?
™
and let it
™
do the
™
across your muscles.
™
away
™
How often should I use the
G2PRO ?
™
We recommend 15 minutes per session for
your entire body. Feel free to treat your extra
sore muscles for an additional 30-60 seconds
throughout the day.
How often should I replace my
AmpBITs?
On average the AmpBITs should be replaced
every 90 days. In a clinical setting, where
your average daily use will certainly be more,
we recommend replacing the AmpBITs after
approximately 30 days of use.
How long does the battery last?
Battery lasts for approximately 45 minutes
depending on the amount of pressure applied.
If I need more information, what
should I do?
Visit us online at www.TheraGun.com/training for
detailed how-to videos.