VIBIA Warm 4900-INC Assembly Instructions

1
Short screw
2
Spotlight assembly
4900-INC.
Net Weight 3,8 Kg
4900-CFE. Net Weight 3,8 Kg
4901-INC. Net Weight 4,3 Kg
4901-CFE.
Net Weight 4,3 Kg
4905-INC.
Net Weight 4,1 Kg
4905-CFE. Net Weight 4,1 Kg
4906-INC.
Net Weight 4,6 Kg
4906-CFE.
Net Weight 4,6 Kg
Caution
Before assembling and installing this product, carefully read the following:
-Always use the recommended bulb
-Never use a bulb with a wattage exceeeding the recommended one. Always use a bulb with the recommended wattage or lower.
-If the steel cable or the power cord of this lamp is damaged, it must be replaced only by the manufacturer or their technical service or by a person capacitated to this effect
to avoid any risk.
-This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
-We recommend reading the manual before installaing the lamp. Keep this instructions for future reference.
Warm
Design by Ramos & Bassols
ASSEMBLY INSTRUCTIONS
SUPPLIED MATERIAL
4900 4901
1 un. 1 un.
1 un. 1 un.
TECHNICAL SPECIFICATIONS
3 x E-26 Med. Base 120V 40W Max.
1 x GU24 C.F. 120V 13W.
3 x E-26 Med. Base 120V 40W Max.
1 x GU24 C.F. 120V 13W.
3 x E-26 Med. Base 120V 40W Max.
1 x GU24 C.F. 120V 13W.
3 x E-26 Med. Base 120V 40W Max.
1 x GU24 C.F. 120V 13W.
1.
4900 - 4901
4905 4906
1 un. 1 un.
1 un. 1 un.
2.
4905 - 4906
Class I. Product with an additional
protection cable (grounds).
Product protected against solid
object as big as or bigger than
12 mm. No protection against
water.
Product that CAN be in contact with
normally-flammable materials (wood
or others).