Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
6.1 Connected to TCP server as Client
No.
【Network connection】：
Computer connected to router, and the router named H60-L02(configurable for user)
Noted the IP address as 192.168.1.50
1
【Built TCP server】：
Open TCP&UDP test tool to build a TCP server: port6000 (configurable for user).
Click to start the server, then TCP server from PC starts to listen to port6000, and other network devices can
connect and communicate with it.
2
【Module installation】：
Substrates VCC short jumper, GPIO0 jumper disconnected.
Plug E103-W01 into test baseboard.
3
Plug the baseboard into PC by USB connector (Please download CP1202 driver if the PC cannot recognize
baseboard).
USB port number for testing：COM30.
AP mode is the default mode for E103-W01, which is equivalent to Wi-Fi router. Cellphone or PC can search
Copyright ©2012–2018 Chengdu Ebyte Electronic Technology Co., Ltd.
Remarks
E103-W01 User Manual
7
Advertisement
Table of Contents
