Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
6.2 Module build TCP SERVER to connect to PC as AP
No
In factory mode, module's IP address is 192.168.4.1 when act as AP.
Check network status of PC, see below information means the connection between PC and module is ok.
AT command can be used to restore the factory state if user ever changed module's parameter.
1
【Module recommends TCP server】:
Make sure PC is connected to the modules, then click "server settings" button.
2
Click "open multiple connections"(exiting transparent transmission mode is necessary) first, then click "built
server" to see below information.
Copyright ©2012–2018 Chengdu Ebyte Electronic Technology Co., Ltd.
Remarks
E103-W01 User Manual
16
Advertisement
Table of Contents
