Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
5 Package requirements
Note: Please try to use the package in the product package. When making the E103-W01 chip package, do not place
the pads under the non-functional pins！
6 Quick Start
E103-W01 module is easy to use. In order to allow users to quickly familiarize themselves with the module, this
section will guide the user through simple setup to achieve configuration and communication in various modes.
The test process uses AT commands. For quick connection, we have developed quick configuration software for users.
This section of the test uses the configuration software to operate, the module will echo the currently issued
instructions, so that users can quickly understand the usage of the AT command (Note: you need to add a line break
after each AT command).
Of course, after the user is familiar with the AT command, the AT command can be manually sent using the serial
debugging assistant without using the configuration software. It is also possible to use an external controller (MCU)
to directly connect to the module UART for AT command communication without using the backplane.
Hardware：
1
E103-W01*1
2
E103-W01 baseboard*1
3
PC with wi-fi
4
Router*1（Mobile wi-fi hotspots）
Software（download from our official website）
1
E103-W01 configuration software
2
TCP&UDP testing tool
3
Accessport 1.3
Copyright ©2012–2018 Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W01 User Manual
6
Advertisement
Table of Contents
